Navigate the view
The view centers on the part of the window that the panels leave uncovered. Opening, closing or resizing a panel reframes it, and a saved scene looks the same in every view apart from the shape of the area around it.
Orbit, pan and zoom
Section titled “Orbit, pan and zoom”| Action | Mouse | Tool |
|---|---|---|
| Orbit | Middle-drag | Orbit (O) |
| Pan | Shift + middle-drag | Pan (H) |
| Zoom | Scroll wheel or trackpad | Zoom (Z) |
The mouse shortcuts work while any tool is active, and don’t interrupt it. For example, you can orbit halfway through drawing a line, then carry on drawing. Releasing the middle button returns you to the tool you were using.
The scroll wheel zooms toward whatever is under the pointer. With the Zoom tool, drag up to zoom in and down to zoom out. In a perspective view, hold Shift while dragging to change the field of view instead.
Zoom Extents
Section titled “Zoom Extents”View → Zoom Extents (Shift+Z) fits the whole model in the clear canvas, keeping it away from docked panels, the toolbar and the status bar. It preserves your current view direction and projection. Opening a file without a saved view frames its model the same way.
View → Zoom Selection, also in the right-click menu, frames only what is selected the same way, so you can get close to one part of a large model.
Standard views and parallel projection
Section titled “Standard views and parallel projection”View → Standard Views turns the camera to a fixed direction: Iso, Top, Bottom, Front, Back, Left or Right, then fits the whole model in the clear canvas as Zoom Extents does. Top and Bottom put the green axis up the screen, the others keep blue up.
View → Parallel Projection draws the model without perspective, so parallel edges stay parallel and a top view reads like a floor plan. Equal lengths at any depth appear equal on screen, which makes tracing a drawing or checking a façade against an elevation easier. View → Perspective switches back. Orbit, pan and zoom work in both projections, and the projection is saved with the project.
Scenes
Section titled “Scenes”A scene saves a view of the model under a name, so you can come back to it. Scenes keep the camera’s position, direction, field of view and projection, which layers are visible, and which section planes cut. They’re saved with the project. SketchUp files open with their scenes, in the order of SketchUp’s scene tabs, and each scene hides the tags it hid in SketchUp.
Open the Scenes panel from Window → Scenes. It opens by itself when a file with scenes loads.
- Add Scene saves the current view and visible layers as a new scene, named Scene 1, Scene 2 and so on.
- Click a scene and the camera glides to its view. View → Scenes lists them too.
- Drag a scene up or down the list to put it in another place.
- Play glides through every scene in list order, pauses at each one and starts over after the last. It starts with the scene after the one the camera shows. Click Stop, click a scene, or orbit, pan or zoom to stop it. View → Play Scenes does the same.
- To rename the selected scene, type a new name under the list and press Enter.
- Update saves the current view, visible layers and section display to the selected scene, replacing what it had. Set up the view and layers first, then click Update.
- Save layers, under the scene’s name, chooses whether the scene shows and hides layers. Clear it for a scene that should only move the camera and leave the layers as they are. Scenes made before scenes saved layers start with it cleared; check it to save the layers visible now.
- Delete removes the selected scene.
How the camera moves between scenes
Section titled “How the camera moves between scenes”Window → Model Settings sets how the camera travels to a scene, for the whole model:
- Motion. Orbit swings the camera around the model, so going from a view of the front to a view of the back passes around its side. Straight moves the camera along a straight line, as SketchUp does; between views from opposite sides it passes through the model.
- Glide time is how many seconds the camera takes to reach a scene. Set it to 0 to jump there.
- Pause time is how many seconds Play rests at each scene.
New models orbit, glide for a second and pause for a second. These settings are saved with the project and changing them can be undone.
Show different things in each scene
Section titled “Show different things in each scene”Put what each scene should show on a layer of its own. For example, to label each scene, put each label on its own layer. Then, for each scene, show its layer, hide the others, and click Update. Showing or playing the scenes switches the layers as the camera starts moving to each one.
A bar at the left of a scene marks the scene the camera shows. It goes away once you orbit, pan or zoom. Adding, renaming, updating, moving and deleting scenes can each be undone. When showing a scene changes which layers are visible, undo brings the previous layers back, but not the previous view.
Scripts and plugins can add and change scenes too; see Model and entities.
Environment
Section titled “Environment”View → Environment switches the background between Studio, a neutral backdrop, Sky, and Plain, a single flat color.
To change the backdrop color, choose View → Environment → Backdrop Color… and pick a color. Studio stays slightly lighter at the top and darker at the bottom, while Plain fills the whole view with exactly that color, such as white for images to print or place on a page. Save to Image uses the same background. Reset to Default brings back the original gray.
Modlumi remembers your backdrop and color for every model, including the next time it starts. They aren’t saved in project files, so other people see their own choice when they open your models.
Face style
Section titled “Face style”View → Face Style changes how faces draw while you model:
- Shaded draws faces solid, so they hide what’s behind them. This is the default.
- X-ray makes every face see-through. You can see, select and snap to edges and points behind faces, while faces can still be clicked and drawn on.
- Wireframe draws edges only. Faces can’t be clicked or drawn on, so clicks and inferences find only edges and points.
You can switch in the middle of a tool. For example, start a line, turn on X-ray to reach a corner at the back of a box, click it, then switch back. Each model opens in Shaded.
Show hidden things
Section titled “Show hidden things”Hidden geometry and objects normally don’t appear at all. Two options in the View menu reveal them, drawn with stippled faces and dotted edges:
- Hidden Geometry shows hidden edges and faces.
- Hidden Objects shows hidden groups and components.
View → Guides shows or hides the guide lines made with the Measure tool, and View → Axes shows or hides the red, green and blue drawing axes. See Hide and unhide for hiding things in the first place.