Release notes
Version 0.28
Section titled “Version 0.28”Released on 2026-11-15.
- Fixed depth so scenes that span large distances draw correctly. In a model with something very large around it, such as a sky dome, edges behind walls showed through them.
Version 0.27
Section titled “Version 0.27”Released on 2026-11-15.
New features
Section titled “New features”- Start from a welcome screen with sample models. When Modlumi starts, it offers a finished birdhouse and bookshelf to explore, your own files to open or import, and the units for a new model. A new hands-on lesson, Your first model, walks you through building something from scratch. Help > Welcome Screen shows the screen again, and you can turn it off at startup. Welcome screen in the user guide · Your first model in the user guide
- Find any command or tool by typing its name. Press Shift+S or Ctrl+K, or choose Help > Search Commands, and type what you want to do. Results show where each command lives in the menus and its shortcut, and searching for mirror finds Flip. Extension commands are listed too, and the commands you used last come first. Search commands in the user guide
- SketchUp files bring their text labels and dimensions with them. Leader text, screen text and linear dimensions now import with their position, text, tag and hidden state. Modlumi tells you when a file holds annotations it can’t keep, rather than failing the import.
Improvements
Section titled “Improvements”- Large models orbit, edit and undo faster. Drawing a detailed house model takes less than half the time per frame, an edit or undo inside it rebuilds only the part that changed, and hovering over dense geometry finds snap points several times sooner.
- Extrude works on more wall faces. A face beside walls that weren’t perfectly square stopped extruding beyond a certain distance, and faces where two curved walls cross refused to extrude at all. Original forum report · Original forum report
- Section planes fill only solid shapes. A box made of single faces, or a room without its roof, was capped as if it were solid, so you couldn’t see inside. Open shapes now show their cut lines without a fill, as in SketchUp. Original forum report
- SketchUp files with a hole that touches itself now import. One face with a figure-8 shaped hole stopped the whole import with an error about intersecting polygon boundaries. Original forum report
- New models start in the units you chose, in every open window. A Modlumi window that was already open when you chose Use for New Models in another one kept starting new models in the old units.
- Long bug reports are no longer lost. Help > Report a Bug accepted descriptions longer than the site takes and then dropped them without a word. The form now counts characters as you near the limit.
Version 0.26
Section titled “Version 0.26”Released on 2026-11-07.
New features
Section titled “New features”- Light your model with the sun and see its shadows. Turn on View > Shadows, then drag the sun across the sky with the Sun tool. Window > Sun places it by its angles, or as the real sun at a city you pick, on a date and at a time of day. The sun is saved with the model and every change to it can be undone. Sun and shadows in the user guide
- Give materials a realistic finish with PBR shading. Materials now have roughness and metallic values and can take roughness, metallic, normal and opacity maps. Switch the view between Standard and PBR in its corner, or under View > Shading, to see metals reflect the sky and leaves cut out of a flat face. These finishes come in with SketchUp materials and go out in glTF exports. PBR shading in the user guide
- Create and edit materials in the Materials panel. New material makes a plain color material at once. Select a material and edit it below the list: its color or image, opacity, roughness, metallic and normal map, or pick a finish from Matte to Mirror. Edit a material in the user guide
- See through your model with X-ray and Wireframe face styles. View > Face Style switches between Shaded, X-ray and Wireframe. X-ray makes faces see-through so you can select and snap to edges behind them, even in the middle of drawing or moving something. Face style in the user guide
- Plan woodworking projects with the Cut List plugin. Window > Cut List lists your model’s parts with their sizes, quantities and materials, lays them out on sheets and boards with the saw kerf, and exports the list as CSV or a printable report. Cut List in the user guide
Improvements
Section titled “Improvements”- See image thumbnails when picking a file. The file picker has a Thumbnails view beside the list. Pickers that only take images, such as a material’s image, open on it.
- A refreshed look in both themes. The interface uses calmer grey surfaces with thin outlines, and keeps the orange accent for what’s active, such as the current tool. The website and documentation match it.
- Move now moves what you drag. Pressing on a face, a selection or a screen text label and dragging it moves it in one gesture, so a label can be dragged into place. Something Move picked up without being selected is no longer left selected afterwards, as in SketchUp.
- Extrude shows its preview when you push a face into a solid. Pushing a face into a box to make a pocket showed nothing until you clicked.
- The file picker sorts numbered names by number and no longer starts with an old search. Names such as texture-9 and texture-40 sorted backwards, and a search left in the last picker could hide every file.
Version 0.25
Section titled “Version 0.25”Released on 2026-11-03.
New features
Section titled “New features”- Cut through your model with section planes. The Section Plane tool places a plane on a face, or level, and everything on its far side is hidden so you can look inside. Right-click a plane to turn its cut on or off, reverse it or look straight at it. Scenes remember which planes cut, and section planes in SketchUp files are imported. Section planes in the user guide
- Position textures on a face with pins. Right-click a textured face and choose Texture > Position to move, turn, scale, shear or distort its image by dragging four colored pins, for example to turn wood grain the other way. Texture positioning in the user guide
- Soften and smooth edges. Window > Soften Edges smooths the selected edges by the angle between their faces. The Eraser softens an edge with Ctrl (Option on a Mac) and unsoftens it with Alt (Command), and Properties has Soft and Smooth check boxes. Clicking a smoothed surface selects all of it. Softening edges in the user guide · Original forum report
- Export the scene playback as a GIF. File > Export Animation records your scenes playing, at the size and frame rate you choose, as a looping GIF. Export an animation in the user guide · Original forum report
- Use the fonts installed on your computer. In the desktop app, 3D text can use any font installed on your computer as well as the bundled ones. A model that uses a font that isn’t installed names the missing font instead of quietly using another one. 3D text in the user guide
- Choose a text label’s font, size and color. Properties sets these for one label or several at once. Change a label’s font, size and color in the user guide
- Light and dark themes. View > Theme switches between Dark and Light, or follows your system’s setting. The interface also has a new look, set in the Inter typeface. Light and dark theme in the user guide
Improvements
Section titled “Improvements”- Extrude again right after extruding. After you extrude a selection of faces or edges, the new far ends are selected, ready for the next extrusion. Original forum report
- Extrude a face along an axis. While extruding a single face, the arrow keys lock the extrusion to the red, green or blue axis, drawn in that axis’s color, so the walls come out slanted. Extrude along an axis in the user guide · Original forum report
- Snap to guides and other objects while editing inside a group. Inside a group or component, tools now snap to guides and to the edges, endpoints and faces of the rest of the model, so you can lay out guides first and then draw to them inside a group. Only the open group is changed.
- Combine Solids works as a click tool, and Subtract cuts with the first solid. Choose a command from Edit > Combine Solids without a selection, then click two solids. Objects that aren’t solids show why. Subtract and Trim now use the first solid you pick to cut the second, as SketchUp does; before, it was the other way around. Combine Solids in the user guide
- See the result of Divide, 3D Text and Make Component before you confirm. While these dialogs are open, the viewport shows where edges will split, the text’s outline at its real size, or the box the component will hold.
- Download the desktop app from the web app. A Download desktop app button in the menu bar, and Help > Download the Desktop App, get the installer for your computer while your model stays open.
- Erasing the end of a curve past a crossing erases only that end. Where a line crosses an arc or curve, the curve is now split, so erasing the stub no longer removes the whole curve and the face it bounds. Original forum report
- Bevel shows why it can’t bevel a loop. When an edge next to the loop is too short, Bevel draws that edge in red, a typed distance reports the largest one that fits, and dragging stops at that limit instead of losing the preview. Original forum report
- Type characters that need AltGr or Option. Text fields now accept characters such as @ on a French keyboard. Original forum report
- Extruding onto existing corners keeps soft edges and shows the full preview. When an extruded face lands on existing corners, the joined edges keep their soft and smooth settings, and the preview no longer leaves out faces of the result.
- Cutting imported models with Combine Solids succeeds more often. Cuts that left a very thin sliver between two faces used to be rejected as not a solid.
Version 0.24
Section titled “Version 0.24”Released on 2026-10-30.
New features
Section titled “New features”- Extrude several faces at once. Select faces, then click one of them with Extrude: they all move by the same distance in one undo step. Faces that share an edge move together as one surface, so a selected floor and wall thicken into one solid. Press Alt to move each face along its own direction instead.
- Get unsaved changes back after a crash. While you have unsaved changes, the desktop app keeps a copy of them every two minutes. If Modlumi closes unexpectedly, it offers to restore that copy the next time it starts. File > Save Recovery Files turns this off. Recover unsaved changes in the user guide
- Zoom to the selection. View > Zoom Selection, also in the right-click menu, frames only what is selected, so you can get close to one part of a large model. Zoom Extents in the user guide
Improvements
Section titled “Improvements”- Standard views frame the whole model. View > Standard Views now turns the camera and then fits the model in the view, as Zoom Extents does, so the model no longer ends up off screen. Standard views in the user guide · Original forum report
- Offset keeps arcs and curves. A rounded corner offsets to an arc around the same center, and a click selects the whole offset curve. Offset inward by the arc’s radius or more, and the corner comes to a point. Offset in the user guide
- Send your model with a bug report. Attach model file in Help > Report a Bug or Send Feedback… now also sends the Modlumi project you opened or, on the desktop, last saved, so the problem can be reproduced. Original forum report
- Double-click a face to repeat an Arc fillet. After rounding a corner with an Arc that snapped Tangent to Both Edges, a double-click anywhere on a face rounds its nearest corner with the same radius. Before, it only worked exactly on the corner point and otherwise did nothing. Original forum report
- Copies no longer fill door and window openings. Copying a strip up with Move and Ctrl to make a header over a door covered the opening below with faces. A copy now fills only areas that its own edges enclose.
- Extrude starts over after an extrusion it can’t make. When an extrusion failed, the next click reported an error and typed digits were added to the old distance. Extrude now reports the failure and lets you pick a face again.
- Offset says when nothing changed. An offset that lands exactly on existing edges now says so, and the next distance you type replaces the old one instead of being added to it.
Version 0.23
Section titled “Version 0.23”Released on 2026-10-29.
New features
Section titled “New features”- Make faces from edges you select. Edges that close a loop without a face, such as imported outlines, can now be filled: select them and choose Edit > Make Faces, also in the right-click menu. Each closed, flat loop gets a face. If none can be filled, Modlumi says why. Make Faces in the user guide · Original forum report
- Extrude edges into walls. The Extrude tool now sweeps a loose edge, a curve, or the selected edges into faces. The arrow keys lock the direction to an axis, and typed distances and undo work as they do for faces. Extrude edges in the user guide · Original forum report
- Divide edges into equal segments. Select edges and choose Edit > Divide, also in the right-click menu, to split each one into 2 to 1000 equal pieces. Divide an edge in the user guide · Original forum report
- Assign your own keyboard shortcuts. Window > Keyboard Shortcuts… lists the menu commands and tools. Give any command or tool without a shortcut one with Ctrl or Alt, or a function key. Menus show your shortcuts, and Modlumi keeps them. Your own shortcuts in the user guide
- Scenes can remember which layers are visible. Check Save layers for a scene in the Scenes panel, and showing or playing it hides and shows layers to match. New scenes save layers; scenes in older files keep only their camera. Layers saved in SketchUp scenes come along when you import. Show different things in each scene
- Components can face the camera. Check Face camera in Properties for a flat cut-out, such as a scale figure or a tree, and every copy turns to face you as you orbit. SketchUp components that always face the camera do the same after import. Make a component face the camera
Improvements
Section titled “Improvements”- Draw perpendicular to an edge. Start a line on an edge or a guide line, or pass the pointer over one first, and Modlumi offers the direction square to it. The line turns magenta and says Perpendicular to Edge; hold Shift to lock it. Snapping in the user guide · Original forum report
- Double-click a face to repeat the last extrusion. After extruding a face, double-click another face with the Extrude tool to extrude it by the same distance. Type a distance afterwards to correct it. Original forum report
- Double-click a corner to repeat the last Arc fillet. After rounding a corner with the Arc tool, double-click another corner to round it with the same radius. Original forum report
- Save images as JPEG. File > Save to Image… now chooses between PNG and JPEG, with a quality slider for JPEG. Save an image in the user guide · Original forum report
- Use a plain background in the color you choose. View > Environment > Plain fills the view, and saved images, with exactly the backdrop color, such as white for printing. View > Environment > Backdrop Color… picks it. Environment in the user guide · Original forum report
- Measure’s tape and the Arc tool’s first segment show the axis they follow. Along the red, green or blue axis they take its color and get thicker, like the Line tool. Square to an edge, Measure’s tape turns magenta. Original forum report for Measure · Original forum report for Arc
- Measure starts parallel guides from guide lines, and says which guide you’ll get. Dragging from a guide line now places a guide line parallel to it, as dragging from an edge does. With guides on, the tooltip says Guide point or Guide line, so a press on an edge’s midpoint no longer leaves an unexpected guide point. Guides in the user guide · Original forum report
- SketchUp groups import as groups. They used to come in as components. SketchUp files in the user guide
- Large STL files with Merge coplanar faces import in seconds. A model of over a million triangles never finished importing; it now takes a few seconds. Merging also no longer loses or adds area on curved surfaces. Original forum report
- Tiny faces in finely detailed models no longer go missing. Faces only a few micrometers across were dropped, leaving black specks across detailed imports such as scans. Offset, Extrude and Fillet now also work on geometry that small. Original forum report
Version 0.22
Section titled “Version 0.22”Released on 2026-10-27.
New features
Section titled “New features”- Browse an online library of materials, and share materials as files. The Materials panel’s Library tab lists 27 free materials, such as brick, wood, roof tiles and grass. Click one to download it; the desktop app keeps it, so it works offline afterwards. To share a material, right-click it and choose Export material… to save a .mlmat file. Import material… reads .mlmat and SketchUp .skm files. Each material names its source and license. Library materials in the user guide · Share materials in the user guide
- Modlumi 0.22 for Mac will follow later. This release is for Windows and the browser preview.
- Scenes swing around the model instead of passing through it. Clicking or playing a scene now orbits the camera around the model. Window > Model Settings chooses Orbit or Straight for the model, and sets the glide and pause times. How the camera moves between scenes
Improvements
Section titled “Improvements”- Delete materials, or remove all the ones nothing uses. Right-click a material in the Materials panel and choose Delete, or click Remove Unused next to the material count. Both can be undone. Delete a material in the user guide · Original forum report
- Move screen text labels with the Move tool. Press M, click the label, then click where it should go. Move a label in the user guide · Original forum report
- Double-click a text label to change its wording. With Select, double-clicking a label or a dimension puts its text in Properties, already selected, so you type the new wording and press Enter. Text in the user guide · Original forum report
- Show or hide the drawing axes. View > Axes turns the red, green and blue axes on or off. It only changes the view, not the model. Original forum report
- Modlumi reopens the panels that were open when you closed it. Properties, Materials, Outliner, Scenes and Layers come back where they were docked. The browser preview still starts with the default panels.
- Imported STL meshes look smooth instead of faceted. STL files, and OBJ or PLY files without shading, now soften the edges between faces that meet at a gentle angle: 25 degrees by default, set in the import options. Other 3D formats in the user guide
- Run Modlumi from a USB stick. Start modlumi.exe with –app-data and a folder, and it keeps your settings, layout and plugins there instead of on the computer. The user guide has a small launcher script for the stick. Run Modlumi from a USB stick in the user guide · Original forum report
- Model Settings shows Use for New Models right below the unit fields. A short window cut the button off, so it was easy to miss that new models can keep your units.
- Rotate’s center lands exactly on the point you snap to, also while Shift holds the plane. Holding Shift kept the rotation plane but could put the center off the snapped corner or edge, sometimes far behind it in depth. Original forum report
Version 0.21
Section titled “Version 0.21”Released on 2026-10-26.
New features
Section titled “New features”- Import STL, OBJ, PLY, 3DS, glTF, FBX and COLLADA models. Choose File > Import… or drop a file on the window. STL, OBJ, PLY and 3DS files don’t say which units they use, so Modlumi asks first, and Merge coplanar faces joins the triangles of flat surfaces. The model arrives as one component with a group for each object in the file, materials keep their names and colors, and smoothly shaded surfaces stay smooth. Large meshes import quickly: an armchair of over a million triangles takes seconds. Other 3D formats in the user guide · Original forum report
- Modlumi 0.21 for Mac will follow later. This release is for Windows and the browser preview.
- Reorder scenes, glide between them and play them in turn. Drag a scene up or down the Scenes panel to move it. Clicking a scene glides the camera to its view, and Play, also View > Play Scenes, glides through every scene until you stop it. Scenes in the user guide · Original forum report
Improvements
Section titled “Improvements”- Snap to the point where a line from your first point meets an edge at a right angle. Once you’ve clicked a first point, hover an edge or guide line to find Perpendicular, shown as a magenta dot. It works in 3D too. Snapping in the user guide · Original forum report
- Right-click a row in the Outliner for the same menu as in the viewport. Erase, Hide, Explode, Make Component and the rest act on the selection, so right-clicking a row that isn’t selected selects it first. Original forum report
- Rename materials in the Materials panel. Select a material, type a new name in its Name field and press Enter. Renaming can be undone. Rename a material in the user guide
- Combine Solids commands say why a selection isn’t a solid. The commands are disabled for a group or component that isn’t a solid, and their tooltip names the reason, such as edges that don’t join exactly two faces, or a group that only wraps another group and needs to be exploded first. Combine Solids in the user guide · Original forum report
- Models with many nested component copies stay responsive. Copies of a component now share their geometry for snapping and selection. Four levels of ten rotated copies of a detailed component used to freeze Modlumi for minutes; now the view updates in a few seconds and drawing over them stays smooth. Original forum report
- The feedback form asks for your email first and remembers it. The optional reply address now sits above the description, so we can answer your report, and Modlumi fills it in next time. Original forum report
- Scripts fill faces only where they ask to, as SketchUp’s Ruby API does. addEdges and addCurve no longer make faces when they close a loop; use addFace, or the new entities.findFaces on one of the edges. Scripts can also place another copy of a component with entities.addInstance, and JSON.stringify prints points, vectors, entities and selections. Drawing edges in the scripting guide
- A plugin that needs a newer Modlumi now says so and tells you to update. The error used to list internal feature names and stop mid-sentence. Original forum report
- Edges draw in the edge color inside painted groups and components. Edges inside a group painted with an image used to show as white lines. Like SketchUp’s default style, every edge now uses the edge color.
- Edges just behind curved surfaces no longer show through on Windows.
Version 0.20
Section titled “Version 0.20”Released on 2026-10-20.
New features
Section titled “New features”- Put parts of the model on layers to show and hide them together. Open the Layers panel from Window > Layers to add, rename, recolor, hide and delete layers, and use the Layer field in Properties to move the selection to a layer. Hiding a layer hides everything on it, including whole groups and components, and keeps it from being selected. Geometry on different layers still connects. Layers are saved with the project, and every change can be undone. Layers in the user guide
Improvements
Section titled “Improvements”- SketchUp files open with their tags as layers. Each tag arrives as a layer with its color, and tags hidden in SketchUp arrive hidden. Untagged geometry goes on the Default layer.
- Scripts and plugins can read, add and change layers. Model.layers lists them, addLayer and removeLayer add and remove them inside an operation, and every drawing element has a layer. Layers in the scripting guide
- Choose the color of the Studio backdrop. View > Environment > Studio Color… picks the color the backdrop’s gradient is built around, and Reset to Default brings back the gray. Modlumi remembers the backdrop and its color across sessions. Environment in the user guide
- The status bar counts what’s selected, such as 3 faces, 12 edges. The count gives way to the tool’s guidance when the window is narrow.
- The Outliner tells groups and components with the same name apart. Rows with the same name are numbered, such as 2 of 5, and a named component shows its definition’s name beside it. Hover a row to see whether it’s a group or a component.
- Send feedback from the status bar. The Feedback button moved from the viewport to the right end of the status bar.
Version 0.19
Section titled “Version 0.19”Released on 2026-10-19.
New features
Section titled “New features”- Save views as scenes and switch between them. The new Scenes panel, beside the Outliner, adds the current view as a scene and shows a scene when you click it. Rename a scene, update it to the current view or delete it there; View > Scenes lists them too. Scenes keep the camera’s position, field of view and projection, are saved with the project, and every change can be undone. Scenes in the user guide
- Edit 3D text after placing it. Right-click 3D text and choose Edit 3D Text to change its wording, size, depth or font. Every copy updates in one undo step; Make Unique first to change only one. Rebuilding the lettering replaces edits made inside it. Text placed with an earlier version asks for its wording and size once. Original forum report
Improvements
Section titled “Improvements”- SketchUp files open with all their scenes. Modlumi showed the view of a SketchUp file’s first scene and dropped the scenes themselves. Now every scene arrives, in the order of SketchUp’s scene tabs, and the Scenes panel opens. Scenes without a usable camera are skipped and listed in the import notes. The tags a scene hides aren’t imported yet.
- Scripts and plugins can read, add and change scenes. Model.scenes lists them, and addScene, updateScene and removeScene edit them inside an operation. Scenes in the scripting guide
- Set 3D text in Source Serif 4 or Source Code Pro as well as Source Sans 3. Add 3D Text and Edit 3D Text have a Font list.
- Faces have one material, which both sides show. Faces had a front and a back material, and an unpainted back showed gray. Painting a face now paints both sides, and Properties shows one Material card. SketchUp faces painted only on their back keep that paint. For plugins, Face.backMaterial, Face.backUvTransform and the backMaterial option of MeshBuilder.addPolygon are gone.
- In the browser, choose texture images from your own files. New image material and Replace image opened a file dialog that couldn’t reach the files on your computer. They now open the browser’s file picker. Original forum report
Version 0.18
Section titled “Version 0.18”Released on 2026-10-14.
Improvements
Section titled “Improvements”- Annotate bug report screenshots in green. Green joins red, yellow and blue as an ink color in Report a Bug or Send Feedback.
- Level names and other plugin labels no longer show through dialogs and panels. Labels that plugins draw in the view, such as the level names and heights from Levels, were drawn on top of every window, so they cut across the Levels panel and any dialog open over the view.
Version 0.17
Section titled “Version 0.17”Released on 2026-10-14.
New features
Section titled “New features”- Dimension your model with the new Dimension tool. Click two points, or anywhere along an edge to measure it whole, then move the pointer to offset the dimension line and click, or type the offset. The label shows the length in the model’s units. A dimension follows its geometry: move or scale the vertices it measures and it stretches along, in the same undo step. Select a dimension to replace its text in Properties, where <> stands for the length, as in Width <>. Dimensions and text
- Label your model with the new Text tool. Click a point, an edge or a face and click again to place a label with a leader. It starts as the point’s coordinates, the edge’s length or the face’s area, and typing right away replaces it. Click empty space for screen text that stays put on the screen while you orbit. Labels and dimensions are saved with the model and show in Save to Image.
- Add 3D text as geometry with Edit > Add 3D Text. Type the text, the letter height and how deep to extrude it, or 0 for flat faces, then click where it goes. The letters arrive as a solid component that you can paint, move and edit like anything you draw.
Improvements
Section titled “Improvements”- Scripts and plugins can add and read text labels and dimensions. Entities.addText, addScreenText and addDimension create them, and the Text and LinearDimension classes expose their points, offsets and text. Text and dimensions in the scripting guide
- Extrude and Offset snap to guide points and guide lines. The extrusion or offset ignored guides, so you couldn’t stop it at a guide placed with Measure. Original forum report
- Pasting only guides shows them under the pointer. A copy of guides alone had nothing to preview, so Paste placed them away from where you clicked.
Version 0.16
Section titled “Version 0.16”Released on 2026-10-13.
New features
Section titled “New features”- Export your model as glTF and open it in Blender. File > Export glTF saves a .glb or .gltf file that Blender, Unreal, Unity, Godot and three.js open. Groups and components, materials, textures and smooth edges come along, at the model’s real size. The user guide shows how to open your model in Blender. Open your model in Blender
- Try Rail Sweep, an experimental plugin that sweeps between two profiles along two rails (desktop only). The profile blends from the start shape to the end shape while the rails set each section’s position, direction and width, with a live preview. Closed profiles make a solid. It’s an experiment: it may change or be removed, and we’d like to hear how it works for you. Original forum report · Source on GitHub
Improvements
Section titled “Improvements”- Plugins can read the attributes of imported SketchUp models. Attributes on groups, components and the model are kept when you import a .skp file and are saved with the project, so a plugin ported from a SketchUp extension can recognize the objects that extension made.
- Installing a plugin from a plugin.json on its own explains what to do. Choosing a plugin.json downloaded by itself read its whole folder, such as Downloads, and failed with an error about a 256 MB limit. Modlumi now refuses it right away, names the folder and suggests installing the plugin’s zip. The Plugins page explains how to install a plugin from GitHub. Original forum report
- Save in the unsaved changes prompt opens the save dialog for a new model. Choosing Save for a model that was never saved showed no dialog, and Modlumi then ignored all input.
- Closing Modlumi asks about unsaved scripts as well as the unsaved model. When both the model and the script editor had unsaved changes, the script editor’s question flashed for a moment and the window stayed open.
Version 0.15
Section titled “Version 0.15”Released on 2026-10-12.
New features
Section titled “New features”- Choose how many segments an arc has. As in SketchUp, type a count such as 12s and press Enter, or press + and -, before the first click or while drawing. Later arcs keep the count, from 2 to 360.
- Textures show the right way up. Every image texture rendered upside down, including textures in imported SketchUp models. It was easy to miss on wood or brick and obvious on logos and text. Original forum report
- Guide lines reach the edges of the view again. In 0.14 guide lines stopped partway across the screen and changed length as you orbited. Original forum report
- Sweep tells you when the profile you point at has no face. Clicking an outline of edges with no face did nothing and showed no message. The status bar now says that the profile must be a face. Original forum report
- The Windows installer is named after the release. The installer’s file name and the version in Windows’ installed apps list showed only a code such as 9dd7225. They now start with the release number, such as 0.15. Original forum report
Version 0.14
Section titled “Version 0.14”Released on 2026-10-11.
New features
Section titled “New features”- Modlumi for Windows tells you when a new version is out. It checks when it starts and once a day, and shows a notice in the corner of the canvas with buttons to download the update, read what’s new, skip that version, or close the notice. Help > Check for Updates checks right away, and Help > Check for Updates Automatically turns the checks off. The check sends no ID and nothing about your models.
- Choose the units new models start with. In Model Settings, Use for New Models keeps the current units, precision and suffix. Modlumi then starts in them, as does every model made with File > New. Saved and imported models keep their own units.
- Rectangle and Extrude previews stay in place while you type a dimension. The rectangle outline vanished and the extrusion jumped to each partial value as you typed. The typed value now takes effect on Enter or a click.
Version 0.13
Section titled “Version 0.13”Released on 2026-10-11.
New features
Section titled “New features”- Download Modlumi for Windows. The desktop app saves models straight to disk, exports images, and runs plugins and scripts. It ships with ten built-in plugins. Get it from the download button on modlumi.com. Announcement
- Combine Solids works when the cut goes through a curved edge. Union, Subtract, Intersect, Trim, Split and Outer Shell failed with “the result would not be a closed solid” when a solid with an arc or a welded curve was cut through it. Original forum report
- Erasing and redrawing a side of a rectangle draws it as one edge again. After erasing a line drawn across a face together with the side it touched, a redrawn side stayed split where the old line had met it. Original forum report
- The Eraser erases a whole group or component when you point at something inside it. Edges and guides inside a closed group were ignored, so guides kept in groups looked impossible to delete. Open the group to erase a single guide or edge. Original forum report
Version 0.12
Section titled “Version 0.12”Released on 2026-10-11.
New features
Section titled “New features”- Switch to standard views and parallel projection from the View menu. View > Standard Views turns the camera to Iso, Top, Bottom, Front, Back, Left or Right. View > Perspective and Parallel Projection switch the projection, which is saved with the model.
- Choose the image size when saving an image, and get a clean picture. File > Save to Image opens a dialog with size presets and a locked aspect ratio. Exports leave out selection highlights, tool previews and axes, and can include guides or use a transparent background.
- Make Unique gives selected component instances their own copy of the definition. Find it in the Edit and context menus. The copy gets a new name such as Chair#2, so you can change it without changing the other instances.
- See the width, depth and height of the selection in Properties. Groups and components are measured along their own axes, in the model’s units. For several objects Properties shows the size of all of them together.
Improvements
Section titled “Improvements”- Memory use stays bounded during long editing sessions. Undo keeps the last 500 steps, and fewer when they are very large.
Version 0.11
Section titled “Version 0.11”Released on 2026-10-10.
New features
Section titled “New features”- Trim, Split and Outer Shell join the solid tools. Union and Intersection now also take more than two solids at once. The user guide has a new page on intersecting and combining solids.
- Type exact points in the Line tool. Type [x, y, z] for a position on the drawing axes or <dx, dy, dz> for an offset from the start point. Leave a value blank to keep the start’s coordinate.
- Install plugins from a zip file or folder, and choose what each plugin may access (desktop only). Extensions > Manage Extensions shows a plugin’s permissions before it is installed, and lets you allow or revoke file and network access at any time. Plugins can now also add their own file formats to File > Import and Export.
- Use four new built-in plugins: Modify Solids, Levels, STL and OBJ (desktop only). Modify Solids unites, subtracts, trims and intersects solids in place, so they keep their name, material and position. Levels marks building levels at named heights that every drawing tool snaps to. STL and OBJ import and export those file formats. Solid Inspector can also zoom to each error as you step through them.
Improvements
Section titled “Improvements”- Solid operations and Intersect Faces are much faster on large models. A part with about 6,000 faces now takes around a second instead of more than half a minute.
- When a tool can’t complete an action, the reason appears in the status bar instead of an error dialog.
- Curved surfaces render smoothly. Imported car bodies and other curved surfaces showed their individual faces as flat tiles.
- Glass and other translucent materials stay see-through when viewed from behind. For example, car windows turned opaque when seen from inside the car.
- Erasing a line drawn across a face joins the edges it split. A rectangle kept six edges after the line was erased, so selecting a side picked only half of it. Original forum report
- Intersect Faces works on loose geometry standing on a slab. It failed with an “overlapping interiors” error when, for example, a box touched the slab’s edge or lined up with a hole. Original forum report
- Union works on solids that overlap on a shared floor. Two boxes standing on the same plane and offset from each other couldn’t be united because the result was reported as not solid.
- Extrude cuts through a wall when the opposite side is made of several faces. This happens where a wall meets a corner or a partition. A typed depth that matches the wall’s thickness now lands exactly on the other side instead of leaving a thin skin.
- Partitions extrude next to open boxes standing on the same floor. They were refused as being outside a closed shell.
- The Line tool keeps drawing after a segment closes a face against existing edges. The next typed length used to be ignored.
Version 0.10
Section titled “Version 0.10”Released on 2026-10-10.
New features
Section titled “New features”- Place guide lines and guide points with Measure. Click an edge and click again to place a parallel guide line at the typed or shown offset, start on a point to place a guide point, or double-click an edge to place a guide along it. Guides can be selected, moved, copied, erased and hidden like other geometry, and you can snap to where a guide crosses an edge. Original forum report
- Open models by dragging SKP or MODL files onto Modlumi. Works in the browser and on the desktop. Modlumi asks before replacing unsaved changes, and models without a saved view open framed like Zoom Extents. Original forum report
- Cut faces where they cross with Intersect Faces. Choose Intersect Faces With Model, With Selection or With Context from the Edit or context menu. New edges split the faces they cross, including where flat faces overlap in one plane, and only the new edges are selected. Original forum report
- Combine solid groups and components with Union, Subtract and Intersection. Combine Solids and Subtract are in the Edit and context menus. The result is a new group, faces keep their materials, and the seams where the solids met are merged. Discussion
- See whether a group or component is solid, and its volume, in Properties.
- Extend Modlumi with plugins (desktop only). Plugins add commands to the Extensions menu, with toolbar buttons, shortcuts, dialogs, panels and interactive tools. Manage Extensions turns each plugin on or off, and plugins reload when their files change. The plugin guide explains how to write one.
- Use four built-in plugins: Shapes, Clean Up, Solid Inspector and True Bend (desktop only). Shapes adds editable boxes, cylinders, spheres, helices and more. Clean Up purges and repairs a model in one step. Solid Inspector shows and fixes what keeps a group from being solid. True Bend bends a group or component to an angle with a live preview.
- Extruding a plate with filled holes keeps its base. The slab was left open underneath, with the hole walls hanging inside. Original forum report
- Rectangle, Circle and Polygon draw on the expected face at corners and edges. Where faces meet, the drawing plane now follows the snapped point instead of whichever face was under the pointer, so a shape started on a roof edge no longer ends up on the wall.
- Drawing a closed outline around edges that cross a face now cuts a hole. For example around a pillar standing through a floor; before, the new face overlapped the floor without a hole.
- Copies placed over imported models keep all their faces. Slight rounding in imported meshes could make faces disappear where copied geometry overlapped them.
Version 0.9
Section titled “Version 0.9”Released on 2026-10-08.
New features
Section titled “New features”- Create progressively smaller or larger copies with Move and Rotate. Add a scale to an array count, such as x5 80%, to shrink each copy relative to the previous one. Rotate can create spiral arrays, and division arrays can end at a chosen scale.
Improvements
Section titled “Improvements”- Follow each modeling tool through the status bar. See the current step, active modes, next action, accepted input formats and keyboard shortcuts. The measurement box explains typed values and highlights invalid input.
- Preview Move and Rotate arrays as you type. Check the copy count, spacing and scale before applying the array.
- Large Move copy arrays of loose geometry complete much faster. Removed repeated work that could make arrays freeze the app or take minutes.
- Copied outlines now split existing faces into separate regions. Closed outlines copied onto a flat face create independently selectable faces.
- Offset works on rectangular regions created by copy arrays. Copied faces now join the surrounding surface correctly, preventing the overlapping-interiors error.
- Sweeping a flat offset ring leaves both ends open. The inner face no longer blocks the starting opening when you offset a flat profile before sweeping its outer ring.
Version 0.8
Section titled “Version 0.8”Released on 2026-10-07.
New features
Section titled “New features”- Start a new, empty model with File → New (Ctrl+N, or Cmd+N on macOS). Previously the only way to start over was to restart the app. If the current model has unsaved changes, you can save or discard them first.
- Paint with image materials. In the Materials panel, choose New image material and pick a PNG, JPEG or BMP file. Set the size of one repeat in your model’s units, keep the image’s proportions, and optionally tint it. Image materials show thumbnails; click one, or right-click any material, to resize, replace or remove its image. Images are saved in the project file.
Improvements
Section titled “Improvements”- Imported SKP models keep their textures. Textured faces previously showed only the material’s color.
- Editing models with many nested groups and components is faster. After an edit, Modlumi now updates only the edited part and the objects that contain it, instead of every copy in the model.
Version 0.7
Section titled “Version 0.7”Released on 2026-10-07.
- Large arrays of copies no longer look partly transparent. As an array grew away from the origin, edges behind faces could show through. Faces now hide them at any model size. Original forum report
Version 0.6
Section titled “Version 0.6”Released on 2026-10-06.
New features
Section titled “New features”- Round and cut edges with the new Fillet, Chamfer and Bevel tools. Select edges or a face, or click an edge, then drag or type a size. Fillet accepts a segment count, such as 8s, and Bevel accepts a distance with an angle or a second distance. Scripts can use entities.fillet, entities.chamfer and entities.bevel.
- Scripts that run out of memory now say so instead of reporting “null”.
Version 0.5
Section titled “Version 0.5”Released on 2026-10-06.
Maintenance release with no user-facing changes.
Version 0.4
Section titled “Version 0.4”Released on 2026-10-06.
New features
Section titled “New features”- Select everything with Edit → Select All (Ctrl+A, or Cmd+A on macOS). Selects every visible item in the group or component you’re editing.
- Select related geometry from the new Select submenu. In the Edit menu and the right-click menu, choose All Connected, Connected Edges, Connected Faces, Bounding Edges or Same Material.
Improvements
Section titled “Improvements”- Drawing and extruding stay fast in larger models. These operations now work on the nearby geometry instead of searching the whole model, so extrusion previews stay responsive next to thousands of unrelated faces.
- Scripting is now available only in the desktop app. The browser app no longer has Run Script, the Script Console or the Script Editor.
Version 0.3
Section titled “Version 0.3”Released on 2026-10-06.
New features
Section titled “New features”- Create arrays of scaled copies. After making a scaled copy, repeat the scale or divide the change into intermediate sizes. Preview the copies before applying them and undo the whole array in one step. Original forum request
Improvements
Section titled “Improvements”- See a readable release number in the browser’s menu bar. Makes it easier to check whether the latest release is loaded. Original forum report
- Copy build information from About. Include the version and build identifier in bug reports with one click.
- Sweep a profile around a selected face’s outline. Select a face, start Sweep, and pick the profile. The face’s outer boundary becomes the path, so you no longer need to select its edges one by one.
- Draw an arc tangent to both edges at a corner more easily. When the arc’s endpoints lie on two edges that share a corner, the second endpoint snaps to the same distance from the corner as the first. Magenta feedback shows when the arc is tangent to both edges; cyan still means tangent to one.
- Find Script Console and Script Editor in the new Scripting menu. They were previously in the Window menu.
- Zoom Extents now fits the model in the visible area instead of behind docked panels. Dragging with the Zoom tool is also less sensitive, and new models start with a wider view.
- Sweep no longer leaves overlapping faces when it runs into existing geometry. If a sweep can’t be built cleanly, the model stays unchanged. A sweep that comes out flat through a face on the other side of a solid still cuts an opening.